10.10 0.1 Piso WiFi Pause Time.

10.10.0.1 looks like a “router IP address” or a “Piso WiFi gateway,” so a lot of people type it into their browser hoping to open an admin panel or a pause-time page. In reality, 10.10.0.1 is very often just a typing mistake for 10.0.0.1 (especially on mobile keyboards where it’s easy to add an extra “10.” or put dots in the wrong place).

Note: The 10.10 0.1 Piso Wifi Pause Time, often will result in an error. The correct IP address is 10.0.0.1, and below, you can read how to access the 10.0.0.1 Piso Wifi Pause Time admin page. If you need instructions in Filipino (Tagalog), then visit our 10.0.0.1 Piso Wifi page.

This guide explains:

What 10.10.0.1 is (and when it might actually be real)
Why 10.0.0.1 is the most common “correct” address for Piso WiFi and many routers
How gateway IPs work (in simple terms)
Where 10.0.0.1 is used by country (including Philippines, Brazil, Thailand, India, and Colombia)
A Step-by-step guide to pause time on LPB/LPD Piso WiFi
A troubleshooting FAQ (10+ questions)

What Is 10.10.0.1?

10.10.0.1 is a private IP address. “Private” means it is designed to work inside local networks (like your home WiFi, a shop hotspot, or a Piso WiFi vendo network). It is not meant to be a public website on the internet. You can only reach it when you are connected to the network that uses it.

Here is the key point: 10.10.0.1 can be real, but it depends entirely on how the router or hotspot was configured. Some network admins choose 10.10.0.1 as their gateway. However, in Piso WiFi setups (especially common ones), the gateway is more often 10.0.0.1. That is why many “10.10.0.1” searches are really people trying to reach “10.0.0.1.”

Why 10.10.0.1 Is Often a Misspelling of 10.0.0.1

Most people don’t memorize IP addresses perfectly. They memorize the “shape” of it:

“It starts with 10.”
“It ends with .1”
“It has zeros”

On mobile devices, two common mistakes happen:

Extra digits: You meant to type 10.0.0.1 but accidentally typed 10.10.0.1.
Dot placement: You typed fast and the dots ended up in a different spot.

So if you typed 10.10.0.1 and nothing loads, the first thing to try is http://10.0.0.1 while connected to the Piso WiFi network.

If you searched 10.10 0.1 piso wifi pause time, the most practical fix is usually:

Connect to the Piso WiFi network
Open your browser
Go to http://10.0.0.1

Simple Explanation: What Is a “Default Gateway” and Why It Matters?

Imagine your WiFi network is like a small neighborhood:

Your phone is a house in that neighborhood.
The router (or Piso WiFi device) is the neighborhood “main gate.”
The default gateway is the address of that main gate.

When your phone wants to talk to the hotspot system (for login, vouchers, pause time, or admin settings), it sends the request to the gateway. That gateway is often something like:

10.0.0.1
192.168.1.1
192.168.0.1
10.10.0.1 (sometimes)

A “pause time” page is typically hosted inside the local network. That’s why it usually will not open if:

You are not connected to the WiFi network
You are using mobile data at the same time
You have a VPN enabled
You typed the wrong gateway IP

Can You Log In to http://10.10.0.1/admin?

Sometimes, yes — but only if the network you are connected to uses 10.10.0.1 as its gateway and has an admin page at “/admin.” Many networks do not. Piso WiFi systems commonly use 10.0.0.1, and some use different paths (not always /admin).

A simple rule:

If 10.10.0.1 does not load, try http://10.0.0.1.
If neither loads, check your device’s “gateway/router” value in network details.

How to Find the Correct Gateway IP on Your Phone (No Tech Background Needed)

You don’t need to guess. Your phone can tell you the correct gateway.

Android (most common)

Connect to the Piso WiFi network.
Open Settings.
Go to Network & Internet (or Connections).
Tap WiFi.
Tap the connected network name.
Look for Gateway or Router. That number is the address to open in your browser.

iPhone (iOS)

Connect to the Piso WiFi network.
Open Settings → Wi-Fi.
Tap the small (i) icon next to the WiFi name.
Look for Router. That is your gateway IP.

Once you see the gateway, open your browser and type it directly in the address bar (not the Google search box).

Where 10.0.0.1 Is Used by Country (Including Thailand, India, and Colombia)

10.0.0.1 is popular because it lives inside a large private IP range and is easy for network devices to use as a default gateway. Below are common patterns — but remember: any country can use any private IP depending on the setup.

Philippines

In the Philippines, 10.0.0.1 is strongly associated with Piso WiFi systems, especially vending-style hotspots (including common builds often referred to as LPB Piso WiFi). Users connect, see a captive portal, insert coins or vouchers, and may have a pause/resume feature depending on configuration. Admins often access deeper settings for rates, vouchers, time rules, and monitoring.

Thailand

In Thailand, 10.0.0.1 is often seen in small business WiFi networks, apartment/shared WiFi, cafés, and managed hotspot setups. While “Piso WiFi” as a brand/system is less universal than in the Philippines, the concept of captive portals and voucher-based access exists widely. If you see 10.0.0.1 in Thailand, it usually leads to either a router admin interface or a hotspot login portal managed by the local network equipment.

India

In India, 10.0.0.1 shows up frequently in:

ISP-provided routers in some areas
Small offices using private LAN gateways
Hostel/PG (paying guest) shared WiFi networks
Hotspot systems with voucher login

If users type 10.10.0.1 by mistake, they often meant 10.0.0.1 or another gateway configured by the building or ISP. The same rule applies: check your phone’s “Router/Gateway” field for the correct address.

Colombia

In Colombia, 10.0.0.1 is commonly used inside private networks for homes and small businesses, and sometimes for neighborhood/shared WiFi. Captive portals exist in public places and small ISPs, and the gateway address can vary by equipment and installer preference. If you are trying to reach a local admin panel or a hotspot page, being connected to the WiFi is the difference between “it works” and “it never loads.”

Brazil

In Brazil, 10.0.0.1 is used by certain router brands and configurations, including some home and small-business routers. When it’s a router admin page, you’ll typically see username/password login and settings like WiFi name, password, firewall, DHCP, and port forwarding.

United States

In the United States, 10.0.0.1 sometimes appears in ISP gear, customized router setups, and enterprise networks. It usually leads to a router/modem admin panel or a network appliance interface, not a time-based vending portal.

United Kingdom

In the UK, 10.0.0.1 is less common than 192.168.0.1 or 192.168.1.1, but it does appear in business environments, managed WiFi deployments, and enterprise configurations. What you see depends on the hardware and how the network admin set it up.

Indonesia

In Indonesia, 10.0.0.1 is frequently used in public hotspots, community networks, and small ISP setups. You may see captive portals with voucher entry, free login pages, or router admin panels depending on context.

Egypt

In Egypt, 10.0.0.1 appears often in internal networks, cafés, offices, and shared connections. It usually opens a router login page or a local management page rather than a dedicated vending WiFi system.

Mexico

In Mexico, you’ll see 10.0.0.1 in managed WiFi setups, small businesses, and ISP-managed environments. It’s commonly used as a gateway for network configuration.

Syrian Arab Republic

In the Syrian Arab Republic, 10.0.0.1 is typically used in private networks and cafés where simple router configurations are common. Access usually leads to a local admin interface if permissions allow.

10.10.0.1 vs 10.0.0.1: Quick Checklist

If 10.10.0.1 doesn’t work, go through this checklist in order:

Confirm you are connected to the Piso WiFi / hotspot WiFi (not just mobile data).
Turn off mobile data temporarily (some phones try to “avoid” WiFi that has no internet).
Disable VPN (VPN can block local portal detection).
Try http://10.0.0.1 (most common correct gateway in Piso WiFi setups).
Check gateway/router value in WiFi details and open that exact IP.

Long Step-by-Step: How to Pause Time on LPB/LPD Piso WiFi

Below is a practical, beginner-friendly guide that assumes you are a user (not an admin) who wants to pause remaining time on a Piso WiFi network that supports pause/resume.

Important: Not every Piso WiFi system allows pause time. Some owners disable it to prevent abuse or to simplify usage. If you don’t see a pause option, it may be disabled.

Step 1: Connect to the Correct Piso WiFi Network

Open your WiFi list.
Select the Piso WiFi SSID (network name) provided by the vendo/hotspot.
Wait until it says “Connected.”

If you have weak signal, move closer to the vendo device. A weak connection can cause the portal to fail or load partially.

Step 2: Disable Mobile Data (Temporary but Helpful)

Some phones try to keep using mobile data if the WiFi has a captive portal. That can break the pause-time page.

Turn off mobile data for 1–2 minutes.
Stay connected to the Piso WiFi network.

Step 3: Open the Portal Using the Right Address

Try these in order:

Open your browser (Chrome is usually best).
Type http://10.0.0.1 in the address bar.
If it doesn’t load, try http://10.10.0.1 (some networks do use it).
If both fail, check your WiFi “Gateway/Router” value and open that IP.

If you typed your search as 10.10 0.1 piso wifi pause time, remember: the browser needs the dots as a real IP address, and in many cases you want 10.0.0.1 instead of 10.10.0.1.

Step 4: Log In the Same Way You Started Your Session

Different Piso WiFi portals track your session in different ways. Common options:

Automatic session recognition (no login needed if your device is still connected)
Voucher code login
Account-based login (less common for simple vendos)

If you used a voucher code:

Find the “Voucher” or “Code” field.
Enter the code exactly.
Tap “Login” or “Connect.”

Step 5: Find the “Pause Time” Button

On many LPB/LPD-style portals, the pause feature is found in a user dashboard area that shows:

Remaining minutes
Status (Active/Connected)
Buttons like Pause / Resume / Logout

Steps:

Look for a button labeled Pause, Pause Time, or Time Pause.
Tap it once.
Wait for confirmation such as “Paused” or a status change.

If nothing changes, refresh the page once. Do not tap repeatedly for 30 seconds, because you might trigger repeated requests and confuse the session.

Step 6: Confirm Your Time Is Actually Paused

A real pause should show at least one of these signs:

Status changes from Active to Paused
Countdown stops decreasing
A message confirms paused state

To verify:

Stay on the page for 30–60 seconds.
Check if remaining minutes stay the same.

Step 7: Disconnect Safely

Once paused, you can usually disconnect:

Turn WiFi off (or switch to another network).
Turn mobile data back on if you disabled it.

Some systems require you to remain connected for the pause to “stick.” If you notice your time still decreases after disconnecting, reconnect and try pausing again, then wait a full minute before disconnecting.

Step 8: How to Resume Time Later

When you want to use your remaining time:

Reconnect to the same Piso WiFi network.
Open http://10.0.0.1 (or the gateway shown in your WiFi details).
Go to your session dashboard.
Tap Resume or Start.

Common Reasons Pause Time “Doesn’t Work”

The owner disabled pause time in settings.
You are not on the correct portal IP (typing 10.10.0.1 when it’s really 10.0.0.1).
Your phone is using mobile data instead of the WiFi portal.
A VPN or private DNS feature is blocking local portal access.
Your session expired or was reset.

FAQ: 10.10.0.1, 10.0.0.1, and Piso WiFi Pause Time

1) Is 10.10.0.1 a real IP address?

Yes, it can be real because it is a valid private IP address. But it only works if your local network is configured to use it as the gateway or host a portal on it.

2) Why do people say 10.10.0.1 is “usually” a misspelling?

Because many popular Piso WiFi setups use 10.0.0.1, and users often type an extra “10” by accident. On small phone keyboards, this mistake is extremely common.

3) What should I do if 10.10.0.1 does not load?

First, confirm you are connected to the correct WiFi network. Then try http://10.0.0.1, and if needed check your WiFi details for the “Gateway/Router” value.

4) Do I need internet for the Piso WiFi portal to open?

No. The portal is usually hosted locally on the router/vendo device. You just need to be connected to the WiFi network so your phone can reach that local address.

5) Why does the page load but the pause button is missing?

Many operators disable pause time to prevent sharing or abuse. If the button is missing, it’s likely turned off in the admin settings.

6) Can I pause time if I switch phones?

Sometimes yes, sometimes no. Many systems tie the session to your device (MAC address), so pausing/resuming on another phone may require re-login or may not be allowed.

7) Why does my phone keep redirecting to Google instead of the portal?

This usually happens when you typed the IP into the search box instead of the address bar, or when mobile data is still active and the phone prefers it. Turn off mobile data briefly and type the IP directly into the address bar.

8) Does “10.10 0.1 piso wifi pause time” mean the same as 10.10.0.1?

People type it that way in searches, but the real address must include dots like 10.10.0.1. In many cases the correct portal is actually 10.0.0.1, not 10.10.0.1.

9) Why does the portal show “Connected” but my time still decreases when paused?

Either the pause didn’t successfully apply, or the system is configured so time continues counting even if you disconnect. Reconnect, pause again, and wait 60 seconds to confirm the countdown stops.

10) What is the safest way to find the correct gateway IP?

Check your WiFi network details and look for “Gateway” (Android) or “Router” (iPhone). That number is the most reliable address to open.

11) Can a VPN stop 10.0.0.1 or 10.10.0.1 from loading?

Yes. VPNs and some private DNS settings can interfere with local network routing. Disable them temporarily when accessing captive portals or local admin pages.

12) Is 10.0.0.1 the same in every country?

No. It is a private IP that can be used anywhere, but whether it works depends on the local network configuration. The country examples describe common patterns, not a strict rule.

TLDR

If 10.10.0.1 isn’t working, it does not automatically mean the system is “down.” It often means you are using the wrong local address for that specific network. The simplest approach is:

Connect to the WiFi
Turn off mobile data briefly
Try http://10.0.0.1 or http://10.0.0.1/admin
Check gateway/router in WiFi details if needed